- How to Disinfect a Well - Plan on spending some time doing this job. It is better to do it right the first time. It only takes a small amount of bacteria left in the pipes to re-infect the whole system. During this procedure water will not be drinkable, so plan to do the test at a time when there is [...]Read More about How to Disinfect a Well
- Lead in Drinking Water - Up until the 1950s lead pipe was used as the supply line from the water main to the house and in many areas, it may still be in use. Your home might have plumbing with lead or lead solder. It is impossible to see; smell, or taste lead. Furthermore, boiling water that has passed through [...]Read More about Lead in Drinking Water
- Well Water Tests - The question of whether or not to have your water tested is a serious one that concerns the health of you and your family. Your water should be safe to drink and acceptable for all household uses. Most people think of testing water for drinking quality and forget about the less serious problems that may [...]Read More about Well Water Tests
- Well with Poor Water Flow - Wells should produce a minimum of three gallons of water per minute, anything less than three gallons per minute will create hardships for the home owner. A good producing (residential) well will deliver in the region of five or more gallons of water per minute. The gallons per minute are the number of gallons being [...]Read More about Well with Poor Water Flow
- When Should I Test My Well Water? - The best time to test for contaminant in well water is during the spring or summer following a rainy period. Testing for bacteria should be conducted after repairing or replacing a well pump or piping. If a new baby is expected in the home, it is a good idea to test for bacteria and nitrate [...]Read More about When Should I Test My Well Water?